T O P I C R E V I E W |
blazermaniac |
Posted - 25 Mar 2016 : 13:47:16 Can control and spec limits be applied to Box & Whisker charts and if so do they apply to both the upper and lower whisker? |
3 L A T E S T R E P L I E S (Newest First) |
quinncurtis |
Posted - 28 Mar 2016 : 15:07:00 If you talking about applying two different sets of control limits to a single sample interval (which may have one or more data points, depending on the chart type and the number of samples per sample interval), the answer is no. |
blazermaniac |
Posted - 28 Mar 2016 : 14:42:39 Thank you!
Is there a way to apply control limits to more than one point on the same line in an SPC Control chart and if so are there any examples provided for such a scenario? In my case I may need to apply a different limit to each point. If it's unclear, what I want to be able to do is have 2 measurements for the same lot displayed. |
quinncurtis |
Posted - 25 Mar 2016 : 16:18:40 The Box and Whisker charts are part of the QCChart2D charting software and do not have any of SPC Control chart characteristics (found in QCSPCChart) such as control and spec limits. |