| Author |
 Topic  |
|
|
mrart
6 Posts |
 Posted - 17 May 2010 : 23:51:23
|
How can I add custom line to control chart ?
Customized the color and line type (dashes).
|
|
|
mrart
6 Posts |
Posted - 18 May 2010 : 04:03:14
|
| More than 2 custom line with difference color and dashes. |
 |
|
|
quinncurtis
1164 Posts |
Posted - 18 May 2010 : 09:11:01
|
| Do you want to add fixed limit lines, like specification limits, to the chart; or are you looking to add a variable line, like the x-bar line of the primary chart? You can do the former, but not the latter. |
|
|
|
mrart
6 Posts |
Posted - 18 May 2010 : 11:54:37
|
I am looking to add
- Upper and Lower Specification line
- +/-3 Sigma line
to the existing Control Chart during loading.
|
|
|
|
quinncurtis
1164 Posts |
Posted - 18 May 2010 : 12:12:20
|
You can set the +- 3-sigma limits using code similar to
// Setup upper and lower 3-sigma limits values
this.PrimaryChart.GetControlLimitData(SPCChartObjects.SPC_LOWER_CONTROL_LIMIT).LimitValue = 20;
this.PrimaryChart.GetControlLimitData(SPCChartObjects.SPC_UPPER_CONTROL_LIMIT).LimitValue = 34;
You can add spec limits using code similar to:
// You must add a reference (using xxxx) System.Drawing.Drawing2D at the top of your module to resolve the DashStyle.Dash constant.
// Adding a Specification limit in addition to regular SPC control limits
SPCControlLimitRecord lcl2 = new SPCControlLimitRecord(this.ChartData,
SPCControlLimitRecord.SPC_LOWERTHAN_LIMIT, 0, "L SPEC", "L SPEC");
this.PrimaryChart.AddAdditionalControlLimit(lcl2, SPCChartObjects.SPC_MEASURED_VARIABLE, 1);
lcl2.ControlLimitValue = 26;
this.PrimaryChart.GetControlLimitData(SPCChartObjects.SPC_LOWER_CONTROL_LIMIT_2).LinePlot.LineColor = Color.Green;
this.PrimaryChart.GetControlLimitData(SPCChartObjects.SPC_LOWER_CONTROL_LIMIT_2).LinePlot.LineStyle = DashStyle.Dash;
SPCControlLimitRecord ucl2 = new SPCControlLimitRecord(this.ChartData,
SPCControlLimitRecord.SPC_GREATERTHAN_LIMIT, 0, "H SPEC", "H SPEC");
this.PrimaryChart.AddAdditionalControlLimit(ucl2, SPCChartObjects.SPC_MEASURED_VARIABLE, 1);
ucl2.ControlLimitValue = 32;
this.PrimaryChart.GetControlLimitData(SPCChartObjects.SPC_UPPER_CONTROL_LIMIT_2).LinePlot.LineColor = Color.Yellow;
this.PrimaryChart.GetControlLimitData(SPCChartObjects.SPC_UPPER_CONTROL_LIMIT_2).LinePlot.LineStyle = DashStyle.Dash;
|
|
|
|
mrart
6 Posts |
Posted - 18 May 2010 : 22:18:52
|
| thanks |
|
|
| |
Topic |
|
|
|
Custom Line in Contol Chart
